Skip to main content

Faller, Advanced

Position Description

Duties

  • Demonstrates proficiency in advanced maintenance and troubleshooting in the field.
    This may include but is not limited to:
    • Clutch replacement
      Fuel/spark/air
    • Starter assembly
    • Bar stud
    • Performance problem troubleshooting
    • Minor mechanical problem correction
  • Develops a work plan and presents a briefing to the appropriate personnel on cutting operation.
  • Demonstrates proper chain saw handling and cutting techniques to successfully accomplish felling a tree (greater than 24-inch dbh) to a predetermined lay.
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Performs a stump analysis.
  • Demonstrates proper chain saw handling and cutting techniques to successfully accomplish felling a tree (greater than 24-inch dbh) 90 degrees off its plumbed lean.
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Performs a stump analysis.
  • Demonstrates proper chain saw handling and cutting techniques to successfully accomplish felling a tree (greater than 24-inch dbh) employing the double-cut method.
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Performs a stump analysis.
  • Demonstrates proper chain saw handling and various facing techniques to successfully accomplish felling a tree (greater than 24-inch dbh) considering lack of top weight and lean.
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Performs a stump analysis.
  • Demonstrates proper chain saw handling and cutting techniques to successfully accomplish felling a heavy leaning tree (greater than 24-inch dbh) employing a side-boring, back cut technique.
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Employs double-cutting method, if possible.
    • Performs a stump analysis.
  • Demonstrates proper chain saw handling and cutting techniques to successfully accomplish felling a fire-weakened tree (greater than 24-inch dbh).
    • Applies chain saw situational awareness (size-up).
    • Verbalizes the work plan.
    • Employs double-cutting method, if possible.
    • Performs a stump analysis.
    • Successfully mitigates a hang-up tree.
    • Applies chain saw situational awareness (size-up).
  • Verbalizes the work plan.
  • Utilizes alternative methods, if needed.
  • Avoidance (flagging, appropriate notification, etc.)
  • Fireline explosives
  • Heavy equipment

Position Knowledge and/or Requirements

  • Geographic Area chainsaw certification as Class C Faller.

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form