Skip to main content

Assistant Area Commander Logistics

ACLC Incident Position Description

The Assistant Area Commander, Logistics (ACLC) is responsible for ordering, prioritizing, and allocating logistical resources among multiple Incident Management Teams (IMT) in an assigned area or on single, large-scale incidents/events, based upon Area Command priorities and objectives. Area Command may be established when oversight direction is required to ensure that resource allocation conflicts do not arise among the IMTs. The ACLC reports to the Area Commander (ACDR) and works in the Logistics functional area.

An Area Command organization is normally small with personnel assigned to the Command, Planning, and Logistics functions. Depending on the complexity of the interface between the incidents, specialists in other areas, such as aviation, hazardous materials, environment, and finance, may also be assigned to Area Command.

Leadership Level 5, Leader of Organizations (Create Vision)

  • For additional information review Level 5 description, expected behaviors and knowledge, suggested development goals, and self-study opportunities.

Prepare and Mobilize

  • Ensure individual readiness.
  • Gather critical information pertinent to the assignment.
  • Travel to and check in at the assignment.
  • Check in with the incident supervisor and/or dispatch when arriving at the incident.
  • Review Incident Action Plan (IAP) and obtain briefing, objectives, and intent from supervisor.
  • Obtain briefing from previous shift/assignment position as necessary, including the statuses of the incident, assigned resources, the existing Logistics Section, and agreements (land use, cost share, blanket purchase, water, etc.).

Build the Team

  • Assemble and validate the readiness of assigned personnel and equipment.
  • Establish and communicate chain of command, reporting procedures, risk management processes, and radio frequency management.
  • Establish a common operating picture with supervisors and subordinates.
  • Participate in operational briefings as directed.
  • Brief assigned personnel.
  • Identify assigned resources and maintain accountability.

Supervise and Direct Work Assignments

  • Establish and communicate objectives, priorities, work assignments, and performance expectations.
  • Identify, analyze, and use relevant situational information to make informed decisions and take appropriate actions.
  • Adjust actions based on changing information and evolving situation awareness. Develop and implement contingency plans. Communicate changing conditions to assigned resources and supervisor.
  • Ensure incident objectives and performance standards are met.
  • Monitor performance and provide immediate and regular feedback to assigned personnel.

Perform Assistant Area Commander Logistics-Specific Duties

  • Identify and order resources required for Area Command Logistics operations.
  • Gather intelligence from incident LSCs, coordination center, and other personnel responsible for the incidents.
  • Establish and maintain positive interpersonal and interagency working relationships (e.g., IMT, coordination centers, expanded dispatch, agency personnel, cooperators, comptroller, Buying Team [BUYT]).
  • Determine work/space requirements, location, and procurement procedures for the Area Command team.
  • Establish procedures that facilitate communications, including Area Command frequency coordination, sharing or reallocation of resources, and problem-solving or conflict resolution.
  • Participate in briefing with Agency Administrator(s).
  • Maintain a log of strategic decisions and significant events for inclusion in the Area Command final documentation package.
  • Evaluate and share all functional information for logistics with Area Command team members.
  • Evaluate effectiveness of the current system of expanded dispatch and identify needed improvements.
  • Take appropriate action if delegated authority for expanded dispatch.
    • Provide adequate staff including Expanded Dispatch Coordinator (CORD).
    • Ensure adequate facilities.
    • Determine the scope of responsibility.
    • Identify relationship with BUYT.
  • Receive and process orders for all other Area Command functions.

Communicate and Coordinate

  • Communicate effectively using multichannel radios. Use plain language and Incident Command System (ICS) terminology.
  • Ensure personnel know radio operating procedures.
  • Keep subordinates informed.
  • Update supervisor on current accomplishments and/or concerns.
  • Ensure Logistics expectations are communicated to other functional areas during meetings and briefings.
  • Coordinate with IMT LSCs when geographic area is operating under Area Command structure.
  • Follow established processes and chain of command for collecting, producing, and distributing information.
  • Ensure clear understanding of expectations and timely communication within and across ICS functional areas and chain of command.
  • Establish communications and exchange necessary briefings/information with the following:
    • Support resources
    • Adjacent resources
    • Supervisor
    • Other ICS functional areas
  • Conduct and/or participate in After Action Reviews (AAR).

Manage Risk

  • Apply the Risk Management Process as stated in the NWCG Incident Response Pocket Guide (IRPG), PMS 461:
    • Identify Hazards
    • Assess Hazards
    • Develop Controls and Make Risk Decisions
    • Implement Controls
    • Supervise and Evaluate
  • Monitor for signs and symptoms of fatigue, illness, or injury. Mitigate appropriately.
  • Provide for the safety of assigned resources.
  • Identify potential conflicts and resolve them within the same operational period, if possible.

Document

Demobilize

  • Assist in developing Area Command demobilization priorities and procedures.
  • Assist the Assistant Area Commander Planning (ACPC) in developing an Area Command transition plan.
  • Anticipate demobilization, identify excess resources, coordinate with area IMTs to prepare demobilization schedule, and communicate with supervisor.
  • Brief assigned resources on demobilization procedures and responsibilities. Ensure incident and agency demobilization procedures and work/rest driving standards are followed.
  • Return equipment and supplies to the appropriate unit.
  • Complete demobilization checkout process before being released from the incident.
  • During the transfer of command:
    • Ensure continuity of operations.
    • Exchange critical safety information.
    • Communicate transfer of authority through the established chain of command.

Return to top

USWDS Paragraph Bundles

Last Modified / Reviewed:

Please Provide Feedback

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.

NWCG Latest Announcements

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430