Skip to main content

6.10 Latitude & Longitude

Latitude and longitude are measuring lines used for locating places on the surface of the Earth. They are angular measurements, expressed as degrees of a circle. A full circle contains 360°. Each degree can be divided into 60 minutes, and each minute is divided into 60 seconds. The symbol for minutes is (´) and for seconds is ("). 

Latitude lines (called parallels) circle the planet's surface in lines parallel to the equator, which lies halfway between the North and South poles. Latitude lines circle the planet from east and west, beginning at 0° at the equator and increasing to 90°North or 90°South.

Longitude lines (called meridians) run north and south and circle the planet from pole to pole. Each line is identified by the number of degrees east or west from a starting point at Greenwich, England, known as the prime meridian. The longitude at the prime meridian is 0°. Longitudes lines mark the distance westward, to 180°West, and eastward, to 180°East.

Earth with Latitude and Longitude

Latitude and longitude measurements can be written in several ways. For example, 211 degrees, 22 minutes, and 30 seconds is written as 211° 22´30", or with spaces: 211 22 30; or with a decimal after the degrees 211.22´30", or with a decimal after the minutes 211 22.30. One degree of latitude equals about 69 miles. One minute is just over a mile, and one second is about 100 feet. 

When adding or subtracting degrees, convert to minutes and seconds as necessary and borrow the appropriate amount (see Section 1.3). For example, when borrowing 1 degree from 360°, change to 359°60´. To borrow 1 minute from 359° 60´, change to 359° 59´60".

Example 1 320°25´32" - 210°50´41" 

degrees min seconds

Step1. Subtract 1 from 2.
2 - 1 = 1

Step 2. Borrow 1 minute from the 5 for the seconds.
There are 60 seconds in 1 minute.
60 + 30 = 90

Step 3. Subtract 4 from 9.
9 - 4 = 5

Step 4. Subtract 0 from 4.
4 - 0 = 4

Step 5. Borrow 1 degree from 20° for the minutes. There are 60 minutes in 1 degree.
60 + 20 = 80

Step 6. Subtract 5 from 8.
8 - 5 = 3

Step 7. Subtract 210 from 319.
319 - 210 = 109

109°34´51"
 

Example 2 - Add 142° 54´ 43" + 85° 36´ 44".
 
degrees min seconds

Step 1. Add the seconds. 43 + 44 = 87
Sixty seconds equals 1 minute.

Step 2. 87 is greater than 60, so subtract 60 seconds from 87 seconds. There are 60 seconds in 1 minute, so add 1 minute to the minute column.
87 - 60 = 27 seconds

Step 3. Add the minutes.
54 + 36 + 1 (carried over from the seconds) = 91 minutes

Step 4. 91 is greater than 60, so subtract 60 minutes from 91 minutes. There 60 minutes in 1 degree, so add 1 to the degree column. 91 - 60 = 31 minutes

Step 5. Add the degrees.
142 + 85 + 1 (carried over from the minutes) = 228 degrees

228°31´27"

Example 3 - Name the range of latitude and longitude for the borders of Wyoming.

Step 1. Find Wyoming on a map.

Step 2. Locate the east and west borders of Wyoming. 

Longitude 111°W to 104°W. It is west of the Greenwich Longitude.

Step 3. Find the north and south borders of Wyoming.

Latitude 41°N to 45°N. The location is north of the equator.

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form