Skip to main content

3.1 Volume or Capacity

Volume is used to indicate the capacity of a tank or container. It is used by firefighters to answer questions like "How much water is left in the tank?" and "At 15 gallons per minute (gpm), how many more minutes before the tank is empty?" 

VOLUME OF A RECTANGULAR OBJECT

The volume of a rectangular container is determined by multiplying the length (l) by the width (w) by the height (h).

volume

Volume = length × width × height
V = l × w × h

Example 1 - Determine the volume of the tank in gallons.

Example 1 Image

Step 1. Use the equation for determining the volume of a rectangle. V = l × w × h

Step 2. Identify the length, width, and height. l = 5 ft, w = 6 ft, h = 8 ft

Step 3. Set up the problem and solve. V = 5ft × 6ft × 8ft = (5 × 6 × 8) (ft × ft × ft) = 240 ft3

Step 4. Determine the appropriate conversion factor. 1 cubic foot = 7.4805 gallons

Step 5. Set up the cancellation table so all units will cancel except gallons (see Section 2.1).

Cancellation Table

The volume of the tank of water is 240 cubic feet or 1,795 gallons.

Example 2 - The water tank on a newly designed engine is 34 inches wide, 5 feet high, and 12 feet long. What is the capacity of the water tank in cubic feet? In gallons?

Example 2 image

Step 1. Use the equation for determining the volume of a rectangle. V = l × w × h

Step 2. Identify the length, width, and height. l = 12 ft, w = 34 in, h = 5 ft

Step 3. Convert all the measurements to the same units, feet.

Inches to Feet
Step 4. Set up the problem, and solve for volume. V = 2.83 ft × 5 ft × 12 ft = 170 ft3

Step 5. Set up the cancellation table so all units will cancel, except the desired unit, gallons.

Ft3 to Gallons

The volume of the tank is 170 cubic feet or 1272 gallons.

VOLUME OF A CYLINDER

The volume of a cylinder is found by multiplying the area of the base times the height, h. The base of a cylinder is a circle, A = π × r2, where π = 3.14. 

Volume Example

Example 3 - A cylindrical tank of foam concentrate is 5 feet tall. The tank diameter is 2.5 feet. What is the capacity, in gallons, of the tank?

Step 1. Use the equation for determining the volume of a cylinder.
V = π r2 × h

Step 2. Draw a sketch. Label the height and diameter.

Height and Diameter

π = 3.14, r = 1/2 d = 1/2 × 2.5 ft = 1.25 ft, h = 5 ft

Step 3. Set up the problem and solve. V = 3.14 × (1.25 ft)2 × 5 ft = 24.5 ft3

Step 4. Set up the cancellation table so all units will cancel, except the desired unit, gallons.

Ft3 to Gallons

The tank capacity is 183.3 gallons.

 

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form