Skip to main content

Fuel Moisture Sampling

  1. Online Fuel Moisture Sampling History
  2. Fuel Moisture Sampling Procedures

Online Fuel Moisture Sampling History

Fuel moisture sampling can provide useful insight to current conditions if it is done consistently throughout each fire season. Results from sampling efforts around the United States are stored in the National Fuel Moisture Database. Results for sampling history of both live and dead fuels are available for locations around the United States.

Return to Top

Fuel Moisture Sampling Procedures

General Guidelines

  • Record site name, date, time, observer name, observed weather, general site description.
  • DO NOT collect samples if water drops or dew are present on samples.
  • Keep samples in a cool and dry location.
  • Seal containers with tape that will not leave residue.

Live Fuel Samples

  • Only collect foliage or needles and very small twigs remove flowers, seeds, nuts, or berries.
  • Pack containers loosely to avoid spillage but ensure container is full.
  • Include stems of herbaceous plants.
  • Replace lid on container immediately after collecting sample.

Dead Fuel Samples

  • Samples should not be attached to live trees or shrubs.
  • Avoid decayed samples that crumble or splinter when rubbed.
  • Collect samples from several different plants.
  • Ensure container is full or about 20 grams.
  • Do not collect buried samples.
  • Pick samples of different size within the time lag class.
  • Recently fallen material should be avoided.
  • Remove all lichen, moss, and very loose bark from sample.

Duff and Soil Samples

  • Remove all soil and live tree or plant roots from sample.
  • Avoid any soil particles in duff samples and vice versa.

Litter Samples

  • Collect only uncompacted dry litter from both sunny and shady areas.

Handling and Measuring Samples

  • Preheat drying oven between 60°C (140°F) – 100°C (212°F). Be sure to note temp used.
  • Place sample cans with closed lids on scale and record wet weights.
  • Remove lid just prior to placing in oven. If material is lost, re-weigh sample
  • Dry sample for 24 hours (very wet samples 48 hours).
  • Replace Lids immediately after sample is removed from oven and weigh
  • Calculate fuel moisture using worksheet provided here:
Image
Fuel moisture sampling and estimation. This table provides means for tracking sample weights and calculating gravimetric fuel moisture.

Return to Top

Print PDF

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form