Skip to main content

Surface Fire Behavior Worksheet

Table of Contents for This Page

  1. Available Tools and Resources
  2. Required Surface Model Inputs
  3. Surface Model Outputs
  4. Acceleration Effect on Rate of Spread

This comprehensive worksheet can be used with the surface fire behavior lookup tables, the Nomograms and Nomographs, as well as BehavePlus, and runs if you want a paper copy.

Consider using this as your briefing documentation by including a weather forecast narrative, your thoughts about recent fire activity, your sense of how accurate the predictions seem, and when you expect changes through the burn period.

Image
Worksheet for recording information collected and estimates produced when estimating surface fire behavior.

Available Tools and Resources

This section describes how to estimate expected surface fire behavior and provides several references tools used in the process:

  1. A Worksheet (above) designed to document a complete assessment for surface fire behavior and growth using either the lookup tables or the nomographs.
  2. EWS Tables for estimating Effective Windspeed from Slope and Midflame Windspeed. The Effective Windspeeds that result from these tables assumes that wind is blowing ± 30° from upslope. For other situations, manual vectoring using the EWS Table would be necessary.
  3. Surface Fire Behavior Lookup Tables for making estimates of surface fire spread and flame length. Note these assumptions:
    • 10-hr and 100-hr moisture values of 6% and 8% are used in the lookup tables.
    • The *20ft/FCST wind line is provided as a convenience, but only works with stated Wind Adjustment Factor (WAF) & no slope adjustments.
    • Backing & flanking columns are only rough estimates based on ½ and 1 mph windspeeds. Use the Flanking and Backing Fire Behavior Nomograph , or BehavePlus for more precise estimates.
  4. Instructions for Surface Fire Behavior Nomographs and Nomograms.
  5. Flanking and Backing Fire Behavior Nomograph for estimating rate of spread and flame length where fire is spreading more slowly on the flanks and at the back of the fire perimeter.

These tools can help you make expected surface fire behavior estimates. Consider the following:

Return to Top

Required Surface Model Inputs

Return to Top

Surface Model Outputs

  • Rate of Spread is useful in fireline tactical applications; identifying what is at risk in the burn period, escape route limitations.
  • Flame Length/Fireline Intensity is used generally in determining what tactics make sense during the peak burn period, interpreting safety zone concerns, and suggesting spotting potential.
  • Heat per Unit Area is available from nomograms and BehavePlus. Like the Energy Release Component, it may be helpful in suggesting burn duration and fire effects.

Return to Top

Acceleration Effect on Rate of Spread

Image
Fire Spread Acceleration. Fire spread accelerates over a period of time after initiation. The period of time varies based on the fuelbed.

Fire acceleration is defined as the rate of increase in fire spread rate. It affects the amount of time required for a fire spread rate to achieve the theoretical steady state spread rate given 1) its existing spread rate, and 2) constant environmental conditions.

Because initiating fires can take 20 minutes to over an hour to reach a steady spread rate, fire behavior and fire growth can be significantly reduced in the first burn period, and when beginning to spread in subsequent periods.

At this time, fire acceleration is implemented only in FARSITE, using the model developed for the Canadian Forest Fire Behavior Prediction System (Alexander et. al. 1992).

It is active by default, but can be turned off as a model input.

As implemented, inputs are segregated by type of Ignition (point vs. line source) and potentially by fuel type (grass, shrub, timber, slash, a default, or by fuel model). Grass fuels are expected to have more rapid acceleration rates (shorter time to reach equilibrium) than fuel types with larger woody material (slash, etc.).

Return to Top

Print PDF

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form