Skip to main content

PMS 437

Fuels: Landscape Acquisition Critique and Editing

  1. Primary Reference
  2. LCP Data Sources
  3. Other Data Sources
  4. LCP Fuel Themes
  5. Nomenclature for Spatial Data Layers
  6. LCP Critique
  7. Editing and Updating the Landscape (LCP) File

Primary Reference

Guidebook on LANDFIRE fuels data acquisition, critique, modification, maintenance, and model calibration at https://www.fs.usda.gov/treesearch/pubs/31921 Stratton, Richard D. 2009. RMRS-GTR-220. Fort Collins, CO, U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station. 54 p. 

Return to Top

LCP Data Sources

LANDFIRE Data Distribution Site

There are several versions of LANDFIRE data, including LCP files (2001, 2008, 2010, 2012, and 2014). You can evaluate what is available in each version with its Version Comparison Table.  There is no online tool for editing the files before download. Downloaded files may be requested in either the US Albers or the local UTM projection.

Wildland Fire Decision Support System (WFDSS)

Analysis tools in WFDSS (Basic, STFB, NTFB, and FSPro) include downloadable LCP files.  Users may edit the LCP files before download.  Downloaded files come with a custom Albers projection that may require some reprojection effort before combining with shapefiles in FARSITE and FLAMMAP analysis. LCP Critique reports are available alongside the LCP file.

Interagency Fuel Treatment Decision Support System (IFTDSS)

IFTDSS uses spatial analysis tools in support of Hazard Analysis, Prescribed Burn Planning, Risk Assessment, Fuels Treatment, and Fire Effects planning.  Primarily based on the FLAMMAP processor, analysis tools use LANDFIRE data, allowing the user to edit and download LCPs from their projects.

Return to Top

Other Data Sources

Wildland Fire/Treatment History

  • Burn severity layers
  • Fire progression layers
  • Fuel treatments
  • Prescribed fire perimeters
  • Wildfire perimeters

Ecological Considerations

  • Areas of critical environmental concern
  • Sensitive or critical wildlife habitat
  • Threatened, endangered, and sensitive (TES) flora and fauna habitat
  • Rivers and streams
  • Water bodies
  • Vegetation or cover-type classification

Socio-Economic Considerations

  • Ownership and jurisdiction layer
  • Historical and recreational sites
  • Primary and secondary residences
  • Remote automated weather stations (RAWS)
  • Roads and Trails
  • Urban development

Other Base Layers

  • Aerial photos
  • Digital orthophoto quad (DOQ) or quarter quad (DOQQ)
  • Digital raster graph (DRG)

Return to Top

LCP Fuel Themes

Surface Fuel Model

13 original Fuel Models

Anderson, H. E. 1982. Aids to determining fuelmodels for estimating fire behavior. Gen. Tech. Rep. INT-122. Ogden, UT: U.S. Department of Agriculture, Forest Service, Intermountain Forest and Range Experiment Station. 22 p. 

40 Standard Fuel Models

Scott, Joe H.;Burgan, Robert E. 2005. Standard fire behavior fuel models: a comprehensive set for use with Rothermel’s surface fire spread model. Gen. Tech. Rep. RMRS-GTR-153. Fort Collins, CO: U.S. Department of Agriculture, Forest Service,Rocky Mountain Research Station.72 p.

The following themes all relate to a forest canopy that affects mid-flame wind speed, spotting, and crown fire potential.

Scott, Joe H.; Reinhardt, Elizabeth D. 2005. Stereo photo guide for estimating canopy fuel characteristics in conifer stands. Gen. Tech. Rep. RMRS-GTR-145. Fort Collins, CO: U.S.Department of Agriculture, Forest Service, Rocky Mountain Research Station. 49p.

Canopy Cover (CC)

In percent, 0-100%, practical Maximum is 70% in most conifer fuel types.

Canopy Height (CH or SH)

Units in Meters*10, divide by 10 to get actual height in meters.

Canopy Base Height (CBH)

Units in Meters*10, divide by 10 to get actual height in meters.

Canopy Bulk Density

Units in Kilograms/meter3*100, divide by 100 to get actual density.

Return to Top

Nomenclature for Spatial Data Layers

Fuel Type Fuel Model Bloc Pre-Defined Reserved for Future
Pre-defined Models		 Available for
Custom Fuel Models
FB 01-13 01-13 N/A N/A
Custom 14-89 N/A N/A 14-89
NB 90-99 91-93, 98-99 94, 95 90, 96, 97
GR 100-119 101-109 110-112 100, 113-119
GS 120-139 121-124 125-130 120, 131-139
SH 140-159 141-149 150-152 140, 153-159
TU 160-179 161-165 166-170 160, 171-179
TL 180-199 181-189 190-192 180, 193-199
SB 200-219 201-204 205-210 200, 211-219
Custom 220-256 N/A N/A 220-256

Return to Top

LCP Critique

The LCP Critique report is an essential element in the calibration process. It can be obtained from the same WFDSS analysis landscape tab that the LCP was obtained from. Or, if the LCP is downloaded, it can be loaded in FLAMMAP and a critique can be generated from there.  There is a stand-alone version LCPCritique at https://www.frames.gov/catalog/11606.

On the first page

  • View the filename, latitude, cell resolution, and coordinate system in the header information to insure the file used is correct.
  • View the Theme units, ranges, and value distributions to make sure that the lcp is valid and that there is no corrupted data.
  • Determine the important surface fuel models in the LCP.

As an example, this histogram shows that fuel models 183, 165, 102, and 122 are the primary surface fuels.

Image
Fuels distribution display in LCP Critique report showing a bar graph of the fuel model classification.

Is that what you expect? What are the critical inputs for each of these fuel models? Are any of them dynamic?

Image and Legend Pages for Each Theme

Some data problems can be identified visually here, such as vertical and horizontal lines in slope themes. The fuel model image can be reviewed by comparing mapped fuel models with areas that have had ground verification or high confidence classifications.

Theme Distributions for each Surface Fuel Models, in order of importance

  • Evaluate the terrain theme ranges and distributions for elevation, slope, and aspect. Are these appropriate for the fuel model? How would you revise or adjust them? Consider whether the fuel model needs to be changed for certain terrain value combinations.
  • Canopy characteristics should be evaluated carefully to ensure that canopy cover (wind adjustment, fuel shading), tree heights (wind adjustment, spotting distance), and canopy base height (crown fire initiation), distributions make sense for the specific fuel model.
  • Canopy bulk density (active crown fire propagation) values are not only related to the fuel model and canopy tree species, they also must be appropriately scaled for the crown fire propagation model used (surface fire control - Finney vs. crown fire control - Scott & Reinhardt; see Crown Fire Initiation and Propagation Section.

Return to Top

Editing and Updating the Landscape (LCP) File

Any errors or necessary adjustments identified here should be included in landscape edits performed before the first analyses are conducted.

There are several tools for editing LCP files:

Print PDF

NWCG Latest Announcements

The Incident Position Standards and Next Generation Position Task Book are now available for Status/Check-In Recorder (SCKN)

Date: August 27, 2024
Contact: Incident Planning Subcommittee 

NWCG is excited to announce that the NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32, NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32, and Checking In Resources Customer Service Job Aid, J-111 are now available.

The Performance Support Package, which for SCKN includes the Incident Position Standards, Next Generation Position Task Book, and job aid were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Status/Check-In Recorder Position Page

NWCG Incident Position Standards for Status/Check-In Recorder, PMS 350-32

NWCG Position Task Book for Status/Check-In Recorder (SCKN), PMS 311-32

Checking In Resources Customer Service Job Aid, J-111

The Next Generation Position Task Book and Incident Position Standards are now available for Safety Officer, Field (SOFF)

Date: July 26, 2024
Contact: Risk Management Committee 

NWCG is excited to announce that the NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81 and NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81 are now available.

The Safety Officer, Field (SOFF) is responsible for monitoring operations on an incident from a risk management perspective to provide for the welfare of incident resources and the public. The new Incident Position Standards and Next Generation Position Task Book are developed through the Incident Performance and Training Modernization (IPTM) effort.

References:

NWCG Safety Officer, Field (SOFF) Position

NWCG Incident Position Standards for Safety Officer, Field, PMS 350-81

NWCG Position Task Book for Safety Officer, Field (SOFF), PMS 311-81

Updated NWCG Standards for Electronic Documentation (eDoc), PMS 277

Date: July 25, 2024
Contact: Incident Planning Subcommittee 

The Incident Planning Subcommittee has updated the NWCG Standards for Electronic Documentation (eDoc), PMS 277.

The NWCG Standards for Electronic Documentation (eDoc) establishes the standards for collection and retention of records on wildland fires. This July 2024 update will provide incident management teams the most current standards required to maintain incident records and submit them to host units at the close of an incident.

References:

NWCG Standards for Electronic Documentation (eDoc), PMS 277

eDoc Box Directory (zip file)

NWCG Off-Highway Vehicle Typing Standard Request for Comment

Date: July 24, 2024
Contact: Mobile Fire Equipment Subcommittee 

The Mobile Fire Equipment Subcommittee has released Equipment Bulletin 24-002 NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment. This bulletin outlines the proposed NWCG OHV typing standard, as well as the business need for establishing the standard. Comments on the proposed standard will be accepted through August 15th using the comment form linked below.

References:

ETC-EB-2024-02: NWCG Off-Highway Vehicle (OHV) Typing Standard - Request for Comment

NWCG Off-Highway Vehicle (OHV) Typing Standard Comment Form